Sprayed UPVC doesn’t ask for much, but a little care goes a long way. With a few simple habits, you can keep the finish looking sharp and stop any early wear from creeping in.

In this guide, we’ll walk through the basic aftercare sprayed UPVC needs, how to avoid accidental damage and the signs that tell you when it might be time for a refresh.

What does sprayed UPVC need after spraying?

Sprayed UPVC requires controlled handling and periodic checks to protect the coating from impact, friction and chemical exposure.

Core Maintenance Tasks:

• Manage environmental build up such as algae and debris
• Check seals, hinges and high contact areas
• Avoiding unnecessary pressure on frames
• Prevent scratches and damage caused by impact
• Avoiding abrasive tools and harsh cleaners.

These measures will support the long-term performance of the UPVC coating.

What cleaning products are safe for sprayed UPVC?

Look for non-acidic, non-bleach, gentle formulas that are specially designed for plastics.

Strong chemicals and rough cleaning tools can break down the surface, create dull patches or cause the colour to fade.

Suitable options include:

• Warm water
• Mild household soap
• Dilute white vinegar

You should use a soft cloth or microfibre pad to prevent scratches and a soft bristle for difficult corners and seals.

How often should sprayed UPVC be cleaned?

Sprayed UPVC is relatively low maintenance, requiring a deep clean once every two-three months.

This prevents dirt from bonding to the coating, ultimately reducing the risk of staining and discolouration.

Can you use a pressure washer on sprayed UPVC?

No, a pressure jet washer should not be used on sprayed UPVC.

The high-pressure water can lift the edges of the coating, damage seals and force moisture into the joints.

For rinsing, opt for a standard garden hose on a low-pressure setting.

Keep the nozzle at a distance and avoid direct force on edges or corners.

How can sprayed UPVC be protected from damage?

Impact and abrasion are the main causes of coating damage. Preventing contact is the simplest way to prolong the finish.

Practical measures include:

• Keep ladders, tools and furniture clear of frames
• Moving plant pots and outdoor items away from door bases
• Being mindful of keys, rings and bags around edges and handles
• Preventing pets from scratching at doors
• Avoiding sharp objects when removing dirt.

By following these simple steps, you will ensure the sprayed finish stays fresh for years to come.

How do you keep sprayed UPVC looking new?

To maintain the fresh factory finish of sprayed UPVC you should:

• Remove debris before it bonds to the surface
• Avoid using sharp tools around the frames
• Clean glazing seals to prevent black residue transfer
• Check hardware for movement that may be rubbing on the coating.

These small interventions will prevent chips, scratches and pressure marks from appearing on the coating, so that the UPVC maintains its new appearance.

When does sprayed UPVC need recoating?

With the right care and regular maintenance, sprayed UPVC can last for more than ten years, but exposure, movement and daily use can eventually create visible changes.

Recoating is needed when you see:

• Fading or dull patches from UV exposure
• Chips or scuffs caused by impact or friction
• Wear around high contact areas such as handles and hinges
• Cracks or flex lines linked to structural movement
• Patchy or inconsistent colouring from weathering

Recoating is only necessary when the finish no longer provides consistent colour or stable protection.

Conclusion

Sprayed UPVC doesn’t demand much, but a small amount of care goes a long way.

Gentle cleaning, sensible protection and early attention to any small defects will keep the finish sharp, even and long-lasting.

At Spray Vue, every project comes with a ten-year warranty.

If any issue arises, we put it right promptly and at no cost to you.

Get a free no obligation quote today.